Uniden uh095sx Owner's Manual

Also see for uh095sx: Brochure

Contents

Operation1240 Receive ChannelsThe uh095sx also has 40 receive only channels (CH41 to CH80) which can beprogrammed with frequencies ranging from 450-512MHz (in 12.5kHz steps). Whenprogrammed they are added to the FM band channels.If you know the frequency you may store it manually.Manual ProgrammingTurn power off. Press and holdwhile turning power back on.The channel indicator flashes thelowest available empty channel. Youmay use the or to selectanother channel.Press /ENTER . The first digit of the frequency indicatorflashes. Press or to select first digit.Press or to move left or right between digit positions and press orto change digits.When finished press /ENTER, the channel indictor flashes. Press or toselect next channel for programming or press and hold /ENTER to store setting.A confirmation tone sounds. The channel is automatically entered into OS scanmemory.Deleting a Programmed Receive ChannelFollow the steps in Manual Programming to enter a frequency for a desired channel.Select 0 for the first frequency digit and then press /ENTER. Press or toselect another channel or press and hold /ENTER to exit programmingmode.Roger BeepRoger Beep is a BEEP that is sent tonotify the end of transmission (bothPTT and VOX transmission.)Press eight times.Press or to display ON.Press and hold /ENTER to storethe new setting.If a button is not pressed within 10 seconds the uh095sx willautomatically exit the Menu Mode.MENUMONMONMENUMENUSCANMENUMENUUNIDEN Model uh095sx Dual Band (UHF CB/AM CB) RadioMENUMENU