|
UST500 CONTROL BOARD12 06MC0074@00B010014/04/2010![]() LED: States and Operating ModesLED states and OperatingModesIcon Colour Colour PermanentlyonBlinkingThe display shows thevalue/resource set for the “maindisplay”.In the event of an alarm, it willalternate with the alarm code Exx.(when more than one alarmoccurs at the same time, the onewith the lowest number will beshown first - see Alarms andDiagnostics chapter)Alarm Red Active alarm Alarm acknowledgedHeatingGreenHeating modeAntifreeze with heat pumpactiveRemote heating mode(MissingIcon)Cooling Cooling mode Remote cooling modeStandbyLocal standbymode(fromkeyboard)Remote standbyDefrost Defrost active Manual defrost activatedEconomyConfigurable----SeeParameterschapter----Ui /dS folderParametersUI07 /dS00Configurable----See Parameters chapter----Ui /dS folderParameters UI07 /dS00LED: Values and Units of MeasureLED Unit of measure Icon Colour Permanently on BlinkingValues can be displayed with a decimal point bysetting parameter Ui08 see parameters chapter,Ui folder)Clock (RTC) Red Shows current time(24hr format)Set timeDegreescentigrade/ /Pressure (Bar) / /Relativehumidity(% RH)Not used Not usedMenu (ABC) Menu navigation /LED: utilitiesLED utilities Colour Permanently on BlinkingAmberConfigurable (°)----See Parameterschapter----Ui folderParametersUI00..UI07Configurable (°°)----See Parameterschapter----Ui folderParametersUI00..UI07(°) permanently on: utility active(°°) blinking:• example UI00..UI07= 1 (Compressor 1) indicates:o safety timingo power limited to 50%o block compressor• example UI00..UI07= 2 (step 2) indicates: safety timing![]() 122,4567,9020,356,3-1![]() 122,4572,9502-25,75-1
|
