Uninterruptible Power Supplies PowerWAVE 3000 User Manual

Also see for PowerWAVE 3000: User manual

Contents

Uninterruptible Power Supplies PowerWAVE 3000 User Manual Manual pdf 23 page image

TS_604_01 PowerWave PW3000/TP User Manual UK 5/1/18 152: General Description2.5.6 Status sub-menuThe Status sub-menu is slightly different from the other sub-menus in that it can be accessed from two points: byselecting the Status option in the Main Menu or directly fromthe Default screen by briefly pressing the DOWN key. TheStatus Sub-menu shows the following:AlarmDisplays a list of any active alarms (an alarm history can beobtained via the Event Log menu described below).Normal indication is BatteryThe Battery menu displays:• Battery Volt: • Battery charge regime (e.g. )• Charge level: XX%Status and running timeThis menu displays:• Status: Indicates 3ph input and 1ph output and UPS is on-line• Para Num: Indicates the number of parallel modules• Running Time: Indicates the time for which the module has beenrunning (Days: Hrs: Mins: Secs)2.5.7 Event Log sub-menuThe Event Log displays a date/time stamped list of the 50 most recent warning and fault events. Fault events are identifiedby a corresponding event code. To access the Event Log you must highlight the Event Log option in the Main Menu thenpress the SELECT key for longer than one second. This offers two further sub-menu options, from which you can chooseto view either Warnings or Faults. Once accessed, using the SELECT key, you can scroll through the log entries using theUP/DOWN keys. To exit the Event Log screen you must press the ON/OFF key for less than one second.2.5.8 Measurements sub-menuThe Measurements menu allows various UPS operatingparameters to be observed, as shown in Figure 2.13.To access the Measurements sub-menu you must highlight theMeasurement option in the Main Menu then press the SELECTkey for longer than one second. This opens the Measurementssub-menu screen which allows you to scroll through andobserve the monitored parameters using the UP/DOWN keys.To exit the Measurements sub-menu either press the UP keyfor longer than one second to return to the Main Menu or pressthe ON/OFF key for less than one second to return to thedefault screen.Mains288VvvvHZHZWv100%22022022022050900050OutputAlarmBatteryStatus andrunning time>1sStatus Sub-menu<1s<1sMeasurementsEvent LogStatusIdentificationControlSettingsFigure 2.12 Menu navigation – Status MenuOutput power (W)Output power (VA)Output current (A)Load percentage (%)Output voltage (V)Output frequency (Hz)Input voltage (V)Input frequency (Hz)Bypass voltage (V)Bypass frequency (Hz)Battery voltage (V)Battery capacity (%)DC Bus voltage (V)Temperature (deg. C)<1sMeasurementsEvent LogStatusControlIdentificationSettingsFigure 2.13 Menu navigation – Measurements