Contents - PREFACE
- SAFETY RULES
- Table Of Contents
- IDENTIFICATION OF MACHINES
- THREADING AND OILING DIAGRAM
- LUBRICATION
- NEEDLES (CONT.)
- SYNCHRONIZING LOOPER AND NEEDLE MOTIONS
- SYNCHRONIZING LOOPER AND NEEDLE MOTIONS (CONT.)
- LOOPER SETTINGS (CONT.)
- REAR NEEDLE GUARD (CONT.)
- PRESSER BAR HEIGHT (CONT.)
- CHANGING STITCH LENGTH (CONT.)
- SPECIAL INSTRUCTIONS
- ALIGNING MAINSHAFT TO CRANKSHAFT
- ORDERING REPAIR PARTS
- SKIPPED STITCHES
- MAIN FRAME, THROAT PLATE SUPPORT, MISC. COVERS & OILING PARTS
- MAIN FRAME, THROAT PLATE SUPPORT, MISC. COVERS & OILING PARTS (CONT.)
- MAIN FRAME, BUSHINGS, OIL GAUGE & LOOPER DRIVING PARTS
- CRANKSHAFT, NEEDLE LEVER & LOOPER DRIVING PARTS
- LOOPER ROCKER & CONNECTING ROD PARTS
- MAIN SHAFT, TAKE-UPS & FEED DRIVING PARTS
- NEEDLE BARS, HOLDERS & GUARDS, LOOPERS & LOOPER THREAD TAKE-UP PARTS
- DISC THREAD TENSION PARTS
- TENSION & LIFTER LEVER PARTS
- CLOTH PLATE, CLOTH PLATE COVER, FOLDER & OIL SHIELD PARTS
- PRESSER FOOT, THROAT PLATE & FEED DOG PARTS
- THREAD STAND PARTS & MISC. ACCESSORIES
- NUMERICAL INDEX OF PARTS
|
18ORDERING REPAIR PARTSILLUSTRATIONSThis catalog has been arranged to simplify ordering repair parts. Exploded views of various sections ofthe mechanism are shown so that the parts may be seen in their actual position in the machine. On thepage opposite the illustration will be found a listing of the parts with their part numbers, descriptions andthe numbers of pieces required in the particular view being shown.Numbers in the first column are reference numbers only and merely indicate the position of that part inthe illustration. Reference numbers should never be used in ordering parts. Always use the part numberlisted in the second column.Component parts of sub-assemblies which can be furnished for repairs are indicated by indenting theirdescriptions under the description of the main sub-assembly. Example:9. 29105AK Looper Drive Lever Crank Assembly, for all Styles ......................................... 110. 22559A Bearing Cap Screw, lower ................................................................. 211. 56343E Oil Splasher ........................................................................................ 112. 56343C Ball Joint Guide Fork .......................................................................... 113. 22587K Bearing Cap Screw, upper ................................................................ 1It will be noted in the above example that the eccentric ball stud and bearing are not listed. The reasonis that replacement of these parts individually is not recommended, so the complete sub-assemblyshould be ordered.IDENTIFYING PARTSWhere the construction permits, each part is stamped with its part number. On some of the smaller partsand on those where construction does not permit, an identification letter is stamped in to distinguish thepart from similar ones.PLEASE NOTE: Part numbers represent the same part, regardless of which catalog they appear. On allorders, please include part name and style of machine for which part is ordered.TERMSPrices are net cash and subject to change without notice. All shipments are forwarded f.o.b. shippingpoint. Parcel Post shipments are insured unless otherwise directed. A charge is made to cover postageand insurance. PreviousNext |