|
HT580 User Reference Guide Unitech Electronic CO. LTDUnitech Part Number: 400412122.1.2-2 Press [2] or [scan] to enter <SCANNER> mode. Press [ESC] to return to the device setting mode.< SCANNER > selection: ON NORMAL/ON FLASH/OFF. Selecting your preference and press [ENTER] tocomplete the setting.2.1.2-3 Press [3] or [scan] to enter <AUTORUN> mode. Press [ESC] to return to the device setting mode. automatically runs the selected program once you change the default. The default ofAUTORUN has been set up in “off” mode. Three programs can be selected; they are ,, and . Once you define the selected program, the program will automatically activatewhen you restart the unit. The main menu will be run in the program.2.1.3 To perform modem command, plug in the modem and it will be automatically initiated. To execute<MODEM INIT>, press [3] or [scan] to enter this mode. Press [ESC] to return to the previous menu.2.1.4 When entering into “SUPERVISOR” mode, you will be required to input your password.For password and detail reference, please refer to the Technical Binder.Press [4] or [scan] to enter <SUPERVISOR> mode setting. Press [ESC] to return to the previous menu.2.2 FORMCACHINGFrom the main menu, FORMCACHING can be selected to input simple inventory information.In the default setting for FORMCACHING, Field 1 is defined as “item”, and Field 2 is defined as “Q’ty”. Tochange the default of the fields, go to “FORM” under “SUPERVISOR” in the mode category.To start <FORMCACHING>, press [2] or [scan] to enter. Press [ESC] to return to the previous menu.2.3 RUN APG580“APG580” is an application generator that enables you to create applications that perform moresophisticated inventory tracking than is possible with FORMCACHING.To run APG580, download it to your HT580 from the included CD. Please refer to technical binder for adetailed description. Previous |