Unitech HT580L Operation Manual

Contents

Unitech Part Number: 400412 61.2.3. AUTORUNAUTORUN is defined to automatically run pre-define FORMCACHING or APG580 program after poweron. Or setup HT580L to back to previous running point before power off. There are below 4 options forchoice.Formcaching Always run Formcaching from beginning after power onHT580LAPG580 Always run APG580(EasyJob) from beginning after power onHT580LRESUME Back to previous running point before power off. This optionis default setting.OFF Always warm-start after power on. It will back to start menu.1.2.4. MemoryTo display total memory and free memory space.1.3. MODEMUnitech provide modem cradle as HT580L’s accessory. So, user can get data through modem ifHT580L is plug into modem cradle.In general, system administrator need to setup host PC to automatically dial to modem cradle and thenissue command from host to do data communication or remote control. For such configuration, it isnecessary to setup modem to automatically pick phone when host call modem. So, it provides option“AUTO ANSWER” to setup modem from HT580L.User can also directly call to remote host PC from modem cradle via HT580L. So, it is necessary tosetup remote PC’s phone number, and then dial out, and then hang up phone if user need to stopmodem communication.There are below 4 options on MODEM1.PHONE NUMBER To setup remote modem’s phone number2.AUTO ANSWER Send ATS0=1 [enter] to modem cradle. So, modem cradlewill automatically pickup phone after one ring tone. Youwill get error message if HT580L is not plugged into cradleor modem cradle is power off.3.DIAL OUT Dial out according “Phone number” setting. It will send“ATDT” + phone number4.HANG OUT Hang up phone (send “+++” and then “ATH”)