Unitech HT660 Programming Manual

Also see for HT660 Wireless edition: Specifications Product reference guide Installation and user manual

Contents

Unitech HT660 Programming Manual Manual pdf 39 page image

-pu8FirmwareVer);Parameter:u8COMPort: The reader’s COM port number (1 – 255)pu8SerialNum: Get reader’s serial number (Length: READER_SERIAL_LEN)pu8FirmwareVer: Get reader’s firmware version (Length: FIRMWARE_VER_LEN)Return code:Please refer to section 9.10.9.5. Antenna ControlFunction Description:Enable/Disable antenna to save power.Function Call:INT32 RDINTv2_AntennaControl (BYTE u8COMPort, BYTE u1OnOff);Parameter:u8COMPort: The reader’s COM port number (1 – 255)u1OnOff: TURN_ONTURN_OFFReturn code:Please refer to section 9.10.9.6. Close ReaderFunction Description:To finish controlling the reader.Function Call:INT32 RDINTsys_CloseReader (BYTE u8COMPort);Parameter:u8COMPort: The reader’s COM port number (1 – 255)Return code:Please refer to chapter 9.10.9.7. Set ISO-15693 Inventory ParameterFunction Description:Set inventory parameter for ISO-15693.Function Call:INT32 RDINT_ISO15693AutoInventoryParam (BYTE u8COMPort, BYTE u8Flag, BYTE u8Afi,BYTE u8MaskLen, LPBYTE pu8Mask);Parameter:u8COMPort: The reader’s COM port number (1 – 255)u8Flag: It specifies the actions to be performed by the VICC and whethercorresponding fields are present or not.u8Afi: Application Family Identifier parameter.u8MaskLen: The mask length indicates the number of significant bits of the mask value.It can have any value between 0 and 60 when 16 slots are used and anyvalue between 0 and 64 when 1 slot is used. LSB shall be transmitted first.pu8Mask: The mask value is contained in an integer number of bytes. LSB shall betransmitted first.Return code:Please refer to section 9.10.9.8. ISO-15693 InventoryFunction Description:Read ISO-15693 Tag.Function Call:INT32 RDINT_ISO15693AutoInventory4Antennas (BYTE u8COMPort, LPBYTE pu8GRLUid);Parameter:u8COMPort: The reader’s COM port number (1 – 255)