Unitech HT660 Wireless edition Installation And User Manual

Also see for HT660 Wireless edition: Programming manual Specifications Product reference guide

Contents

3. You will see the following screen:a. If You Still Have More Items To Count….If you still have more items to scan/count, answer “No” here,and go back to counting inventory with your HT660. You canrepeat steps 1 through 3 for the next round of scanning/count-ing that you need to complete.Each time you get to this step, step 3; select “Physical Count w/Match”. The data will append to what you have already down-loaded into The General Store.Remember, if you want to count one section of your store at atime, you can repeat steps 1 through 3 as many times as need-ed, before answering “Yes” to the “…LAST capture…” question.b. If You Have Finished Counting…..If you have finished physically counting all the items in yourstore or department or vendor, and this is your last download,answer, “Yes” to the “…LAST capture session…” question.You will then see the following screen:Here, you have several options:i. If You Are Taking An Inventory for the Entire Store….If this is a complete store inventory, simply click the“Process” key. The system will then compare the actualinventory file against what you have counted. The sys-tem then determines which items were not counted andsets the quantity on those items to zero. This is reflectedon the adjustments report that gets generated at theend of the physical inventory process. When complete,you will be returned to the General Store main menu