45non-alpha keys.6. In “Virtual keys”, enter the time delay for “Delay To Send Key”. Characterswill be output in the speed as defined.7. In “Virtual keys”, check “Enable Auto Enter”.8. Define a value for “Auto Enter Timeout”. Tap “Set”. Tap OK.9. In MS WordPad, turn to alpha mode. Press and hold a key. The alphacharacters are highlighted in a loop. Release the key. The character,which was focused on will be printed after a period of time, according tothe auto enter timeout defined.10. Tap “Load” to load the previous setting.Screen1. Tap Rotate Right. Screen rotates to the right.2. Tap Rotate Left. Screen rotates to the left.3. Tap Upside Down. Screen rotates upside down.PingThis tool allows you to ping to other devices in LAN network while your terminalis connected to the network.1. Tap “Ping” tab, on Host field, enter the IP addressof the device you want to ping to.2. Check “Constant Ping” so that your terminal willcontinuously ping to the remote device.3. Tap “Start”. The terminal will search for the remotecomputer with the IP address, which you entered.If not found, you will see “Request Time Out”. Ifthe remote computer is found, you will see “HostResponding”.