Unitech MS652 Quick Start Manual

Also see for MS652: User manual Quick start guide

Contents

quick start guide

Unitech MS652 Quick Start Manual Manual pdf 1 page image

MS652 Wearable 2D Ring ScannerQuick Start GuideVersion 1.1401359GChargingFlip open the USB cap on MS652, plug the USB cable into the port onthe scanner and into a USB port on the host computer.Test & FinishOpen a word processing program such asMicrosoft Word or Notepad and scan thefollowing barcode:If the word “unitech” appears on thescreen you have successfully installedyour scanner.MS652 TIPS●The MS652 should be recognized as ageneric HID device by your host device,similar to a standard keyboard. Thisallows you to scan into any field you couldnormally type into.• If the MS652 is out of wireless range fromthe host device, it will automatically saveany scan data in its buffer memory andautomatically upload the scan data to thehost when back in wireless range.• The MS652 can also operate in BatchMode, where a wireless connection is notrequired. In Batch Mode, the MS652saves all scan data in the internal memoryand then uploads the data whenconnected to a host.Operation Mode Wedge Batch Auto*MS652 PairingNote: 1. If MS652 is connected to a host, un-pair will not work. Please remove pairing or turn bluetooth off from the host side first & try again.2. If there is trouble to remove pairing on host device, turn off MS652 & try again. After pairing on host is removed,scan ‘BLE Un-Pair/Pair’ for new pairing.3. If ‘Higher Level RF Signal Checking’ is selected, BLE communication will become more reliable but the distance will be shorter.* Default OptionThank you for purchasing the unitech product.For other product documentation, please scan the QR code for more information.●NFC Pairing with Mobile Devices (BT HID Mode)Step 1. Ensure your mobile device supports NFC and that it is enabled.Step 2. MS652 will automatically enter BT pairing mode.Step 3. Turn both NFC & Bluetooth on your mobile device.Step 4. NFC tag is embedded on the backside of housing nearby unitech logo.Touch near the unitech logo area of the MS652 scanner to your mobilephone, until the device prompts to accept pairing.Step 5. Press ok to respond your Bluetooth pairing request.Step 6. MS652 is now connected to your mobile phone.●Pairing with Mobile Devices (w/o NFC)Step 1. Go to your host device settings and turn the Bluetooth function on.Step 2. MS652 will automatically enter BT pairing mode.Step 3. The MS652 will appear on your device as “MS652-XXXX.”Step 4. Select “MS652-XXXX.”Step 5. “MS652-XXXX” will now appear as paired. Proceed to “Test & Finish.”● Pairing with PC / Notebook (BT HID Mode)Step 1. Open “Devices and Printers” by clicking the Start button and then, onthe Start menu, clicking Devices and Printers.Step 2. MS652 will automatically enter BT pairing mode.Step 3. Click “Add a device,” and then follow the instructions.Step 4. Click the Bluetooth enabled device (MS652-XXXX) you want to addto your computer, and then click Next. If you don't see the device youwant to add, make sure the device is turned on and discoverable.If you just turned on the device, it may take Windows several secondsto detect it.Bluetooth Config BLE Un-Pair / Pair Normal Level RF Signal Checking* Higher Level RF Signal Checking*

/ 2

Related manuals for Unitech MS652