26445400Interleaved 2 of 5 - Check digit - Check digit transmission - Enable445401••••Barcode lengthUse the L1 as minimum length option if you know the minimum length of thecodes in your application!!!- To optimize decoding performance and increase security, select the samelength as the minimum length in your application (do not select a shorterlength!!).= [barcode data] + [Check digit]- Recommended minimum length = 4 characters.- Interleaved 2 of 5 always encodes an even number of characters.- For codes with an odd number of characters, you can add a last characterprinted as 5 narrow bars (not transmitted).- For GTIN compatibility set barcode length to one fixed length of 14 characters- compose 1 or 2 or 3 fixed lengths provides the best performanceand security if the codes in your application have fixed lengths- recommended minimum length = 4 charactersIMPORTANT: Do not select a fixed length of "2 characters" unlessabsolutely necessary - Interleaved 2 of 5 is not a secure symbologyand your product will find "bar codes" even where they don't exist !!!••••Length mode- L1 = Codes with as many characters as specified by L1 and longer are read(L2 and L3 are not used).- L2 = Only codes that comply with the lengths specified by L1, L2, and L3 willbe read.- L3 = Codes at least the length specified by L1 and no longer than themaximum length specified by L2 are read (L3 is not used).Interleaved 2 of 5 - Barcode length - Length mode - L1 as Minimal length (*)445300
