Unitech MS920P Quick Start Manual

Unitech MS920P Quick Start Manual Manual pdf 1 page image

MS920P Quick Start GuideThe Unitech MS920P 2D Pocket Scanner 1. Flip the rubber cover up to expose the micro USB port on the scanner.2. Plug the micro USB cable into the port on the scanner and into a free USB port of a host computer.Charge for 4 hours.Step 1: connect and ChargeTest & FinishStep 5:Open a word processing program or app such asMicrosoft Word or Notepad on your host device.Now scan the following barcode:If the word “Unitech” appears on the screenyou have succesfully connected your scanner.Congratulations!SilenceSilence off * Silence onsilence MS920P TIPS• The MS920P should be recognized as a generic HID deviceby your host device, similar to a standard keyboard. Thisallows you to scan into any field you could normally type into.• If the MS920P is out of RF transmitting range from the hostdevice, it will automatically save any scan data in its buffermemory and automatically upload the scan data to the hostwhen back in RF transmitting range.• The MS920P can also operate in Batch Mode, where aRF transmitting connection is not required. In Batch Mode,the MS920P saves all scan data in internal memory and thenuploads the data when connected to a host. See back pageof this guide for more information about modes and settings.RF HID *COmmunication modeRF SPP USBPlug the USB Dongle to a free USB port ofa host computer.The MS920P is now ready to use.Scan the barcode on the USB Dongle.Connect dongle to hostStep 4:Scan DongleStep 3:COmmunication mode COmmunication mode

/ 2

Related manuals for Unitech MS920P