Unitech PA600 User Manual

Also see for PA600: User manual Specifications Programming manual User manual User manual

Contents

Chapter 3 Getting Connected239. Click Finish.You may be prompted to restart your computer.After you have installed ActiveSync and restarted your computer, the ActiveSync iconappears in your computer’s system tray as shown and ActiveSync ConnectionWizard starts. For detailed information on how to use ActiveSync on your computer,start ActiveSync then click Help → Microsoft ActiveSync Help.Connecting the Device to Your Computer1. After ActiveSync has been installed, connect the USB charging cable to the uni-versal connector on the bottom of your device. If necessary, connect anadapter. Refer to Connecting the PA600 to a PC on page 10.2. Plug the other end of the USB charging cable into a USB port on your com-puter.3. Turn the device on.4. ActiveSync starts automatically and configure the USB port to work with thePA600. The New Partnership setup wizard will automatically start.NOTE: If ActiveSync doesn’t start automatically, click Start → Programs →Microsoft ActiveSync.If a message appears indicating that it is unable to detect a connection,click the Cancel button and manually configure the communication set-tings.5. Follow the onscreen instructions.6. When the configurationprocess is complete, theActiveSync windowappears.7. Synchronization will be initialized and will take place if you’ve chosen to syn-chronize periodically or upon connection.NOTE: Your computer can create a partnership with multiple PA600s. Also, aPA600 can create a partnership with up to two computers.