United Technologies MobileView 9000 Series User Manual
                                                        | |
Contents
| 
Figure 41: Video Tampering Alarm2. Check Enable Video Tampering checkbox to enable the video tamperingdetection.3. Click to edit the arming schedule for video tampering. The armingschedule configuration is the same as the setting of the arming schedule formotion detection.4. Check the checkbox to select the linkage method taken for the videotampering. Audible warning, notify surveillance center, send email and triggeralarm output are selectable.5. Click Save to save the settings.Handling ExceptionThe exception type can be Network Disconnected, IP Address Conflicted, andIllegal Login to the cameras.1. Enter the Exception Settings interface:Configuration> Advanced Configuration> Events > Exception2. Check the checkbox to set the actions taken for the Exception alarm. Refer to42 MobileView 9000 & 9100 Series Analog/IP Camera User Manual |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine