MoxiTrueFit quick reference fitting guidePowered by Era,™ Moxi™ is a beautiful little CRT which features an open fitstrategy that combines three proprietary technologies: Automatic Programwith SmartFocus,™ Natural Sound Balance and Pinna Effect. Your clients canenjoy Moxi attitude with the highest fidelity, most natural sound.Programming Moxi in TrueFitThis quick reference guide will lead you through the steps of a simplifiedfitting for Moxi hearing instruments using Unitron’s TrueFit™ fitting software.To detect the Moxi hearing instrument(s), choose your desired programminginterface.• If using iCube, insert the batteries into the Moxi hearing instruments andclose the battery door.• If using NOAHlink or HI-PRO, open the battery door and insert theprogramming cable, using the cable tool, into the Moxi programming port.Note: Hearing instrument controls, accessories, easy-t, audio streaming and automaticmicrophone options are deactivated during programming.1. Clienta. InformationNOAHWithinClient, click on Information and enter the client’s experience levelwith hearing instruments.StandaloneWithinClient, click on Information. Click the NewClient button, enter the client’s information and clickSave. Click the Blank Session button to begin a newsession. Specify the client’s experience level withhearing instruments using the drop down box.b. AudiogramIf using Standalone TrueFit, click the Audiogrambutton. Enter the client’s audiogram and select thetransducer used for audiometry.When using iCube, inserta battery into Moxi’sbattery compartment.When using NOAHlinkor HI-PRO, insert theprogramming cableinto Moxi.Select the client’s hearing instrument experience level.