ENGLISH56UNIT SETTINGSOnce initialisation is performed (even without time self-training), itwill be possible to access the various control unit functions,including initialisation itself.1. Press and hold the OK key until the display shows the menudesired2. Release the OK key: the display will show the first item in thesub-menu-CFG Rapid configuration-PrG Programming the control unit (full menu)-Cnt Cycle counter-APP Self-training the working times-dEF Loading the default parameters-ini Control unit initialisationRapid configuration is a menu allowing the main control unitparameters to be programmed with a few operations.It is essential the initialisation procedure has already beenperformed (even without time self-training) in order toperform rapid configuration.1. Press and hold the OK key until the display shows the -CFGmenu2. Release the OK key: the display will show the first item in thePot menu.Pot. Power adjustmentSEnS Obstacle sensor adjustmentLoG. Operation logicFinE Exit the menu