VAC V200 POSITIONER Installation,operation And Maintenance Instruction

Also see for V200 POSITIONER: Installation, operation and maintenance Mounting instructions Fine Tuning Installation, Calibration and Troubleshooting Manual

Contents

VAC V200 POSITIONER Installation,operation And Maintenance Instruction Manual pdf 5 page image

92077r14V200 POSITIONERwww.vacaccessories.com52.3 4-20mA transmitter installation2.3.1 Gearwheel installation1. Remove the front cover and indicatoron the V200 positioner. (see page 4)2. Remove Indicator screw(1).3. Install the gearwheel(2) so that it aligns overthe cam locking nut screw(3).4. Secure the gearwheel with theIndicator screw(1).2.3.2 Potentiometer installation1. Install the potentiometer module(4) inthe designed section of the unit asshown. Tighten the screw that securesthe pot arm and spring.The pot gearwheel should be alignedand secured to the larger gearwheel.2. Install the potentiometer board(5) or the4-20mA transmitter module(6) into thedesigned position and tighten the respectivescrews.3. When used for the 4-20mA feedback, securethe potentiometer connector(7) to thetransmitter (6). For potentiometer use only,the connector(7) will attach to the terminalblock(5) and be used with an external positiontransmitter.14321567