VADDIO CeilingVIEW SD CCU Installation And User Manual

Contents

technical specifications

VADDIO CeilingVIEW SD CCU Installation And User Manual Manual pdf 11 page image

CeilingVIEW SD CCUVaddio CeilingVIEW SD CCU Installation and User Guide - Document 341-769 Rev. APage 11 of 16Technical Specifications:CeilingVIEW SD CCUPart Numbers 999-2009-000 (NTSC), 999-2009-001 (PAL)Image Sensor Sony ¼” EXview HAD CCDEffective Pixels (NTSC) 380K PixelsEffective Pixels (PAL) 440K PixelsHorizontal Resolution 470 TVL (NTSC), 460 TVL (PAL)Min. Illumination 1/60 s mode: 1.4 Lux typical (F1.6, 50 IRE) / 1/4 s mode: 0.1 Lux typical (F1.6, 50 IRE)Lens 36X optical zoom, f=3.4 mm (wide) to 122.4 mm (tele), F1.6 to F4.5Digital Zoom 12X (432X Total Zoom)Angle of View (H) 57.8 degree (wide end) to 1.7 degree (tele end)CeilingVIEW SD Image Sizes -• 36X Optical Zoom• Std. Resolution - Aspect Ratio 4:3• Ceiling Height of 9'• Distance to table top 6.5'• Wide End (zoomed out) measurement = 86" x 64.5"• Tele End (zoomed in) measurement = 2.3" x 1.7"Video Outputs VBS:1.0 Vp-p (Sync Negative) & Y/C OutputS/N Ratio More than 50 dBFocusing System Full Auto, ManualMin. Working Distance 320mm (wide end), 1500mm (tele end)Sync System InternalPicture Effects E-Flip, Negative Art, Black & White, Mirror ImageCamera Control • RS-232 (VISCA™, baud rate: 9.6 Kb/s, 1-stop bit)• IR - Responds to Vaddio IR Remote (full functionality), Polycom and TANDBERG IR ZOOM INand ZOOM OUT commands automatically.• With dip switch control (#2 UP), Polycom and TANDBERG “PAN RIGHT” command can activatethe Laser Pointer “MOMENTARY ON” command for document positioning• Camera EnclosureComponents Camera Enclosure, White Trim Ring, Mounting Rails and Mounting HardwareConnectors One (1) RJ-45 for Video and PowerOne (1) RJ-45 for RS-232Camera Enclosure Dimensions 4.85” x 5.75” x 5.75” (H x W x D),Camera Enclosure Weight 2.4lbs• Quick-Connect CV HD/SDConnectorsOne (1) RJ-45 for Video and Power3-BNC: Analog SD (Y/C and composite) OutputsNote: The CeilingVIEW SD has only Y/C and Composite Video Outputs5.5mm OD x 2.5 ID Power ConnectorControls Y-Gain AdjustmentDistance Adjustment (for longer Cat. 5 cable runs)Max Cat. 5 Cable Distance 400’/121.92m between Quick-Connect CV HD/SD and Camera EnclosureQuick-Connect CV HD/SD Dimensions 1.75” x 5.5” x 3.0” (3.75” with BNC connectors) (H x W x D) 1/3-Rack WidthQuick-Connect CV HD/SD Weight 1.0lbsPower Supply 24VDC, 2AAccessories 999-6000-002 Rack Mount Adapter Panel for 1/3-Rack Quick-Connect Interface• Quick-Connect CCU Interface (QCCU)Connectors Power Connector: 36VDC 5.5mm OD x 2.5mm IDPower RJ-45: Not applicable with CeilingVIEW CCUControl In RJ-45: Accepts RS-232 from ProductionVIEW or other non-daisy-chain control systemsControl Out RJ-45: Passes RS-232 and Sync video feed to camera EZIMTally: 2-Pin Phoenix type spring cage connectorVideo Inputs: Not applicable with CeilingVIEW CCUVideo Outputs: Not applicable with CeilingVIEW CCUVideo RJ-45: Not applicable with CeilingVIEW CCUCamera Feature Dip Switch For Future Functionality – Leave all switches in the down positionVideo Adjustments Unused on the Quick-Connect CCU – Make adjustments on the Quick-Connect CV HD/SDPower Supply 36 VDC, 2.08 AmpDimensions 1-RU Rack Mount - 1.75” H x 19” W x 6” D (4.45 cm x 4.26 cm x 15.24 cm)