VARDE OVNE Fuego 1 Installation And User Manual

Contents

VARDE OVNE Fuego 1 Installation And User Manual Manual pdf 6 page image

6Important!Before installing and lighting your new VardeOvne stove for the first time, we recommendthat you first take a couple of minutes to readthis installation and user guide.Inspection of installationIt is very important that the installation is in-spected by a qualified chimney sweeper beforethe stove is used for the first time.RegulationsAll local regulations, including regulationsreferring to national and European standards,should be adhered to when installing yourstove.Note: All Varde Ovne stoves are closed fire-places.The stoves are designed for intermittentcombustion and can be connected to a chim-ney used by other fireplaces.This Varde Ovne stove has been certified inaccordance with European Standard EN 13240,German Stufe II and Norwegian Standards (NS),and has therefore been proved to be an environ-mentally friendly product.Professional installationWe recommend that you consult with thedealer who sold you the stove or anothercompetent installer, as there may be specificthings to consider during the installation. Youshould also receive the applicable rules forinstalling the stove and follow them.Note:Compulsory registrationYou are required by law to register your stove with your local chimney sweeper.Store the stove in a dry place at room temperature until installation. Moisture will damage thestove. Be aware that an existing chimney is not necessarily effective enough for a new modernstove.EC declaration of confirmaty.MANUFACTURERName: Varde Ovne A/SAdress Kongevej 246, DK-6510 Gram, DanmarkPejse InspektionName: RWE Power AGAdress: Dürner strasse 92, 50226 Frechen, GermanyNotified body Number: 1427Product Varde Fuego 1 and 2Product type FuegoType code Wood-burning stove, suitable for intermittent combustionStandard Construction products (89/106/EEC/), standard used: EN13240Application Residential HeatingFuel WoodSpecial conditions NoneCE-MarkningIssued 2012Nominal Output 5 kWFuel type WoodFluegas temperature 340 °CEfficiency 75 %Co-release 0,08 %