VDO CD 2604 MP3 User Manual

Also see for CD 2604 MP3 -: Datasheet

Contents

6This can only be accomplished bypersons familiar with automotive electrical andmechanical systems.After connection, see “SPECIAL FUNCTIONS”for calibration procedure.Electronic or Motorised AntennaConnect pin A5 to the power supply for anelectronic antenna or the control wire for therelay of an automatic motorised antenna.Do not use this connection for direct powersupply to the antenna motor.Connector B**Loudspeakers (use 4 ohm loudspeakers only)Do not connect any of the loudspeaker leads toearth or directly to a booster/amplifi er withouthigh level input or via an external fader! You canconnect the loudspeaker leads directly to anamplifi er with high level input:Connecting 4 loudspeakers:Front RearLeft (+) Green B5 White B7Left (-) Green/black B6 White/black B8Right (+) Grey B3 Blue B1Right (-) Grey/black B4 Blue/black B2** For this accessory, contact your dealer.Connector CThese specifi c set connectors belong toaccessories sold separately (contact your dealer)a-Yellow Connector C1 for line out (see Fig.4).You can connect a power amplifi er with 2 or 4additional loudspeakers to this set using theRCA cable.1- Use the red socket to right channel andwhite socket to left channel.2- Use the blue wire (Pin 6) to Amplifi erRemote On/Off.b-Green Connector C2Cables used for Car Computer control(temperature sensor), Steering Wheel remotecontrol (see Fig.5). Please consult your dealerfor the accessories and correct interface.Temperature SensorYou can connect a temperature sensor to thePin 7 that will automatically give you a visual andaudible signal when the outside temperaturedrops below 3°C. Use the Car Computer menuto activate/deactivate this feature.Warning: The temperature sensor is onlyan aid and cannot be used to determine exactroad conditions.You are entirely responsible for decidingwhether it is safe to continue driving.Wired Remote ControlUse the Pins 8 & 9 to connect wired remotecontrol accessories.c-Blue Connector C3 (MP3/DVD changer)Cable used for CD, MP3 or DVD changer arecome with changer. (see Fig.6).Connector DThese specifi c set connectors belong toaccessories sold separately (contact your dealer)a-Connector D1You can connect our Hands-free Phone Kit(available separately) via this connector (Fig7).With this accessory, the battery of your mobilephone could be charged, and the audio outputofthe mobile phone can be played through the carloudspeakers.Check with your dealer for more details aboutthis accessory.Telephone InIf you are using your own car kit please consultyour dealer for the appropriate interface.Telephone MuteUse this input (pin 5) or the TEL_MUTE pinkwire to connect your telephone mute signal.Or you can connect the telephone mute signalfrom the phone to the pink wire of the headunit.Note : Before using your telephone, set thephone system and confi gure its appropriatedetection level in the SETUP- Menu.b-Connector D3 (fig. 8)- External Remote DisplayYou can show the content of headunit ona specifi c car remote display via connector D3.Contact your dealer for an ‘EDI Box’ of thespecifi c car which is sold separately.- External Remote ControlYou can connect an infra red remote eye(available separately) via D3 to remote controlthe headunit.Audio InYou can connect external audio equipments viaAux-in RCA cables.Red wire- for Right ChannelWhite wire- for Left Channel input.Rear Seat muteConnect the external device (eg. DVD player)input to the ‘Rear Seat mute wire’ (Blue) to mutethe rear speaker sound from the head unit.