VDO CD 3300 User Instructions

Contents

VDO CD 3300 User Instructions Manual pdf 5 page image

* Depending on version6METAL SLEEVEInsert metal sleeve into the opening (182 x 53 mm) in the car dashboardor console (fig. 7). See separate installation card. For optimal performanceof the CD player*, the metal sleeve should be positioned within the limitsshown (between -10° and +30°).Fix metal sleeve into place by pressing the metal tags outwards using a screwdriver (fig. 8).CONNECTING RADIO (fig. 9)In order to make full use of the ON/OFF logic function of this set, which limits operation to1 hour after removal of the ignition key, use adapter EA6259 for most cars excluding mostGerman makes.Ensure battery is disconnected.Insert aerial connector E into aerial socket. Good reception is only possible with a good aerial.Fix aerial adapter (EA6257/00) if needed. Use hook (J) on back of set to secure fixing.Insert power supply connector A into socket A’.Insert loudspeaker connector B into socket B’.• (optional) Remove the protective cover from socket C’.• (optional) Insert the blue CD changer connector C3 into socket C3’.• (optional) Insert the green connector C2 into socket C2’.• (optional) Insert the yellow line-out connector C1 into socket C1’.The green connector slides between the yellow connector C1 and the blue connector C3.You need at least one of these connections to keep C2 in place.MOUNTING RADIOSlide the radio into the metal sleeve until the springs at either side of the radio snap intothe openings of the sleeve (fig. 10). NOTE: This set can be mounted in a Japanese car, pleaseconsult your dealer.Reconnect the negative car battery terminal (fig. 11). Installation is now complete.REMOVING RADIO (fig. 12)You can unlock the radio using the two U-brackets supplied.Remove the front, see ‘SECURITY’, ‘DETACHABLE FRONT’.Insert both U-brackets into the holes on the front of the set until they lock.Remove the radio from the metal sleeve.REPLACING FUSE (fig. 9)• Pull fuse F out of connector block at rear of radio. Replace with a 10 A blade-type fuse.The new fuse must be of exactly this value and type otherwise the set will not be adequatelyprotected. Ignoring this procedure may lead to damage to the set, which will invalidate theguarantee.INTERFERENCE SUPPRESSIONMost modern cars have sufficient interference suppression. If you experience interference generatedby the car, consult your garage.32121432121MOUNTING