Vacon 100 Industrial User Manual

Also see for 100 flow: Applications manual Installation instruction Installation manual Installation manual Installation manual

Contents

Vacon 100 Industrial User Manual Manual pdf 29 page image

Fiedlbus parametrization vacon • 27Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/55.3 Modbus TCP/UDP parameters and monitoring values5.3.1 Ethernet common settings (M5.9.1)5.3.2 IP Address modeSelectable alternatives are DHCP (Dynamic Host Configuration Protocol) and Fixed. The DHCPprotocol gives IP addresses to new devices connecting to local network. This address is valid for acertain period of time. If no DHCP server is found, an automatic random IP is given. A fixed IPaddress is specified manually and it does not change. When the mode is changed from DHCP toFixed the addresses will read:IP: 192.168.0.10Subnet mask: 255.255.0.0Default gateway: 192.168.0.15.3.3 Fixed IP addressAn IP address is a series of numbers (like above) specific to the device connected to the Internet.Table 12. Ethernet common settings (M5.9.1)PanelTree Parameter Range Default ID DescriptionP5.9.1.1 IP address mode Fixed (1),DHCP(2) DHCP (2) 2482 IP ModeP5.9.1.2 Duplicate IPDetectionDisabled (0),Enabled (1) enabled 2569This is setting for enablingACD (See Chapter 3.4).When disabled drive doesnot check for or react toaddress conflict situation.P5.9.1.3.1 IP address 1.0.0.0 -223.255.255.255 192.168.0.10 2529 Fixed IP addressP5.9.1.3.2 Subnet mask 0.0.0.0-255.255.255.255 255.255.0.0 2530 Fixed Subnet maskP5.9.1.3.3 Default gateway 0.0.0.0-255.255.255.255 192.168.0.1 2531 Fixed default gatewayP5.9.1.4 Active IP address - - 2483Shows current active IPaddress. It is same as fixedvalue if IP mode is "Fixed".P5.9.1.5 Active subnetmask - - 2484Shows current active sub-net mask. It is same as fixedvalue if IP mode is "Fixed".P5.9.1.6 Active defaultgateway - - 2485Shows current active defaultgateway. It is same as fixedvalue if IP mode is "Fixed".P5.9.1.7 MAC address - - 2486 Drive MAC address