Vacon 100 industrial Installation Manual

Also see for 100 flow: Applications manual Installation instruction Installation manual Installation manual Installation manual

Contents

Vacon 100 industrial Installation Manual Manual pdf 99 page image

3 Lift off the fan unit.4 To release the fan from the fan unit, remove 8screws.BAAA. 4 screwsB. 4 screws5 Replace the fan.6 Re-assemble the drive and connect the cables.7 Put the touch shield back.7.7.4 REPLACING THE POWER UNIT OF THE AC DRIVE7.7.4.1 Replacing the power unit, MR8WARNING!Before you start replacing the power unit, make sure that there is no input voltagecoming into the cabinet. Switch off the voltage at the power source. Replacing thepower unit when there is voltage in the cabinet can cause injury or death.1 Remove the protective covers of the drive.2 Disconnect all the power cables from the bottom ofthe power unit.COMMISSIONING AND ADDITIONAL INSTRUCTIONS VACON · 99LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/ 7