4 Operating16 Operating instructions VRT 350 0020135485_004.4 Overview of setting and read-out options4.4.1 Using the overview in table formatYou will find below an overview of the setting and read-outoptions.– If the "Increment/Select" column is blank, these are val-ues that you can read but not adjust.– If a value cannot be set at the factory, for example be-cause it is currently being measured, the "Factory reset"column will be blank.– If nothing is entered in the "Selection level 2" column,you will be taken from "Selection level 1" directly to the"Setting level".4.4.2 Entering your own settings▶ In the last column, "Own setting", enter the values thathave been set by you.