Vaillant ecoTEC plus Instructions For Installation And Servicing

Also see for ecoTEC plus 415: Instructions for installation and servicing Instructions for use Instructions for installation and servicing

Vaillant ecoTEC plus Instructions For Installation And Servicing Manual pdf 6 page image

Instructions for installation and servicing ecoTEC plus / 0020020828_056UK Government’s Standard Assessment Procedure (SAP)for energy rating of dwellings. The test data from which ithas been calculated has been certified by B.S.I.1.5 Statutory requirementsThe appliance is suitable only for installation in GB and IEand should be installed in accordance with the rules in force.In GB the installation of the boiler must be carried out by acompetent person as described in the following regulations:- The manufacturer’s instructions supplied- The Gas Safety (Installation and Use) Regulations- The appropriate Buildings Regulations either- The Building Regulations- The Building Regulations (Scotland)- The Building Regulations (Northern Ireland)- The Water Fittings Regulations or Water bye laws in Scotland- The Health and Safety at Work Act, Control of Sub-stances Hazardous to Health (COSHH)- The Current I.E.E. Wiring RegulationsWhere no specific instructions are given, referenceshould be made to the relevant British Standard Code ofPractice. In IE, the installation must be carried out by acompetent person and installed in accordance with thecurrent edition of I.S.813 “Domestic Gas Installations”, thecurrent Building Regulations and reference should bemade to the current ETCI rules for Electrical Installation.In GB the following Codes of Practice apply:BS 4814, BS 6891BS 6798 BS 6700BS 5440 Part 1 and 2 BS 7074 Part 1 and 2BS 5546 Part 1 BS 7593BS 5449 BS 7671In IE:I.S.813 BS 5546BS 7074 BS 5449BS 7593Manufacturer’s instructions must not be taken as over-riding statutory requirements.h Note!For further information, see the current issue ofthe Building Regulations, approved document L1(in the UK) and the current issue of the following:• Central heating system specification (CheSS)• Controls for domestic central heating systemand hot water. BRECSU.CertificationThis boiler certificated to the current issue of EN 483 forperformance and safety. It is important that no alterationis made to the boiler, without permission, in writing, fromVaillant. Any alteration that is not approved by Vaillant,could invalidate the warranty and could also infringe thecurrent issue of the Statutory Requirements.1.6 Regulations, rules and guidelines.This boiler meets the requirements of Statutory Instrument,No. 3083 The Boiler (Efficiency) Regulations, and there-fore is deemed to meet the requirements of Directive92/42/EEC on the efficiency requirements for new hotwater boilers fired with liquid or gaseous fuels. Typetest for purposes of Regulation 5 certified by: Notifiedbody 0087. Product/production certified by: Notifiedbody 0086.1.7 CE labelThe CE label on this appliance shows compliance with:- Directive 90/396/EEC on the approximation of the lawsof the Member States relating to appliances burninggaseous fuels.- Directive 73/23/EEC on the harmonisation of the Lawsof the Member States relating to electrical equipmentdesigned for use within certain voltage limits.- Directive 89/336/EEC on the approximation of the Lawsof the Member States relating to electromagneticcompatibility.1.8 Benchmarkh Note!Vaillant Ltd. support the Benchmark initiativeAt the rear of the installation manual, you willfind a Benchmark gas boiler commissioningchecklist. It is very important that this is com-pleted correctly at the time of installation,commissioning and hand over to the user.1.9 Gas council numbersAppliance Gas council numbersecoTEC plus 415 41 - 044 - 53ecoTEC plus 418 41 - 044 - 54ecoTEC plus 428 41 - 044 - 55ecoTEC plus 438 41 - 044 - 571 Introduction