Notes on the documentation 20020261389_02 ecoTEC plus Installation and maintenance instructions 72 Notes on the documentation2.1 Observing other applicable documents▶ Always observe all the operating and installation instruc-tions included with the system components.2.2 Storing documents▶ Pass these instructions and all other applicable docu-ments on to the end user.2.3 Validity of the instructionsThese instructions apply only to:Product article numberVU 446/5-5 (H-GB) ecoTEC plus 0010021520VU 606/5-5 (H-GB) ecoTEC plus 0010021521Gas Council NumberVU 446/5-5 (H-GB) ecoTEC plus 41-694-28VU 606/5-5 (H-GB) ecoTEC plus 41-694-292.4 BenchmarkApplicability: Great BritainVaillant is a licensed member of the Benchmark Scheme.Benchmark places responsibilities on both manufacturersand installers. The purpose is to ensure that customers areprovided with the correct equipment for their needs, that it isinstalled, commissioned and serviced in accordance with themanufacturer’s instructions by a competent person approvedat the time by the Health and Safety Executive and that itmeets the requirements of the appropriate Building Regu-lations. The Benchmark Checklist can be used to demon-strate compliance with Building Regulations and should beprovided to the customer for future reference.Installers are required to carry out installation, commission-ing and servicing work in accordance with the BenchmarkCode of Practice which is available from the Heating andHotwater Industry Council who manage and promote theScheme.Benchmark is managed and promoted by the Heating andHotwater Industry Council.For more information visit www.centralheating.co.uk3 Product descriptionThis product is a gas-fired wall-hung condensing boiler.3.1 Product design6 13 289101112131415 16 17 181975 41 Rainwater drain hose2 Hydraulic pressuresensor3 Heating pump4 Dynamic air separationsystem5 Water-pressure mano-meter6 Electronics box7 Condensate siphon8 Gas valve assembly9 Fan10 Compact thermalmodule11 Ignition electrode12 Integrated condensationheat exchanger13 Air intake pipe14 Temperature sensor inthe heating flow15 Temperature sensor inthe heating return16 Connection for theair/flue pipe17 Flue gas measuringstub pipe18 Rainwater collectingdevice19 Pressure switch3.2 Data plateThe data plate is mounted on the underside of the product inthe factory.Information on thedata plateMeaningBarcode with serial number