Valeport SWiFT SVP Operating Manual

Valeport SWiFT SVP Operating Manual Manual pdf 38 page image

Valeport Ltd © 20190660879e - SWiFT SVP & SWiFTplus Operating ManualPage 389.10. Care and MaintenanceSWiFT is a robust profiling sensor and will provide many years of reliable service.The unit should be thoroughly cleaned and rinsed with fresh water before being returned to its transit case, whereit should be kept at all times when not in use.Care should be taken when removing and replacing the deployment spar to gain access to the charging and dataport. The O rings included in the locking mechanism are an integral part of the system to keep the SWiFTwatertight and should be kept in good condition and checked for correct seating before reassembly.When the deployment spar is removed every care should be taken to avoid any water getting into the connectorbay. If water does inadvertently make its way into this space it should be very carefully dried out. The deploymentspar should not be put back in place until the connector bay is completely dry as water could be forced further intothe instrument and cause damage to the connector or even the electronics inside the housing.Charging should not be carried out where any water is present.9.11. SoftwareSWiFT is supplied with two forms of software package - PC based Valeport Connect and an iOS hand held deviceApp.Valeport Connect is a PC program to set up, down load and display data. It is licence free.Please see manual 8500800b for further details