Vallox 096 MV Instructions For Use, Maintenance And Installation Manual

Also see for 096 MV: Installation instructions User manual Manual Manual Manual

Contents

Vallox 096 MV Instructions For Use, Maintenance And Installation Manual Manual pdf 52 page image

52© Vallox • We reserve the right to make changes without prior noticeWALL MOUNTINGNote the following before mounting:• Mount the Vallox 096 MV / 110 MV in a place where thetemperature does not fall below +10°C.• Avoid mounting the unit on a hollow, echoing partition wall oron a bedroom wall, or prevent the conduction of sound.• The minimum distance between the top of the unit and thefinished ceiling surface is 30 mm. Note that the unit risesduring mounting 10 mm higher than the final height.• Without protective closure, the unit must be located in aplace where the noise does not disturb anyone (storage,technical rooms, etc.).Mount the Vallox 096 MV / 110 MV on the wall with a mountingplate, as shown in the adjacent figure. Make sure that the unit ishorizontally level after mounting.MEASURING TUBESThe accessory bag delivered with the unit includes 4 airflowmeasuring tubes. You can mount these tubes on the ducts tomake ventilation adjustment easier.NOTEMount 145 MV on the floor rack, or on the wall with a mountingplate.CEILING MOUNTING BY USING THE CEILINGMOUNTING PLATEModels 096 MV and 110 MV can be equipped with an optionalceiling mount plate. Attach the ceiling mounting plate:• To the ceiling with M8 thread bars so that they stand theweight of the unit.• Horizontally level, as the plate determines the straightness ofthe unit.Insulate the outdoor air and exhaust air duct against condensationalso between the unit and the ceiling mounting plate.MOUNTING921Ø616MOUNTING