Vallox 90K MC Series Operating, Maintenance And Technical Instructions

Contents

7Vallox90K MC© VALLOX • We reserve the right to make changes without prior notice.What the units include can vary depending on the sales area.MOUNTING INSTRUCTIONSMountingVALLOX 90K MC has to be mounted in a place where temperaturedoes not go below +10 °C.Wall mountingVALLOX 90K MC is mounted on the wall with a mounting plate asshown in the adjacent figure.Wall constructionObserve the wall construction during mounting. Avoid mounting theunit on a hollow, echoing dividing wall and on a bedroom wallbecause of sound conduction, or prevent sound conduction.Condensing waterThe delivery includes a water seal. By connecting a pipe to thewater seal the water condensing from extract air can be led to afloor drain (not directly to the drain). The pipe must not rise after thewater seal. The unit has to be mounted horizontally level, so thatcondensing water can get out of the unit.Cooker hood mountingThe cooker hood is mounted at the bottom of the VALLOX 90KMC unit with knurled-head nuts (A), included in the accessory bagdelivered with the unit. Open the cooker hood’s bottom plate, whichhas the grease filter attached to it, lift the hood against the bottom ofthe ventilation unit and fasten the hood with the knurled-head nuts.Thread the connection wire (B) as shown in the figure, and use a wireshield (C) if neededDamperHood connection wire andwire shieldCondensing water outletCondensing wire outlet portKnurled-head nut, fastening ofhood