Valor Fires 958 Installer And Owner Manual

Also see for Artura 958: Installer and owner guide Installation and owner's guide Installation and owner's guide

Valor Fires 958 Installer And Owner Manual Manual pdf 34 page image

15.7 To replace the burner.(See figure 32).1. Remove the burner unit (See section 15.2).2. Support the elbow injector and unscrew theinjector nut.3. Remove the two screws from the burnerclamping plate (See figure 32).4. Lift the right hand side of the burner, slide it tothe right and lift clear.5. Refit in reverse order.15.8 To remove the main burner injector.(See figure 33).1. Remove the burner (See section 15.7).2. Remove the burner clamping screw (See figure33).3. Unscrew the injector from the burner.4. Refit in the reverse order.15.9 To remove the appliance from the fireplace.1. Remove the burner unit (See section 15.2).2. Slacken the hexagonal adjusters on the cableretainers and unscrew the thumbscrews to releasethe cables.3. Refit as described in the relevant installationsections. Make sure gas soundness, sealing,spillage test and performance are satisfactory.Page 34© Baxi Heating U.K. Limited 2009.INSTALLER GUIDEFigure 33. Main burner injectorremovalFigure 32. Removal of burner