Varytec LED Street Bar 16x3W RGB IP65 Manual

Also see for LED Street Bar 16x3W RGB IP65: User manual

Contents

4 / 162. Designated useThis device was developed for professional use on stages, in discos, theatres etc. The device is onlyapproved for a connection up to 230V 50/60 Hz AC voltage and for indoor and outdoor use.Regular breaks during operation increase the lifetime of your device.Avoid convulsions or any form of forceful impact during the installation or the start-up of the device.Take care that no cables are lying around. You would endanger your own safety and also the safety ofa third party.If you use fog devices make sure that the saturation of the fog has to enable a visibility of at least 10m.Operate the device not during thunderstorms. Surge voltages could destroy the device. Unplug thepower supply during thunderstorms.During the installation the use of the mounting bracket is obligatory.Surrounding objects or surfaces should not be in contact with the device.Make sure that during the installation and removal of the device the area below the place ofinstallation is basically cordoned off. This also applies to implementation of service.The device has basically been protected by a suitable safety.Make familiar yourself with the functions of the device before start-up. People without the experienceshould not handle with the device. The most cause of functional disorder is inappropriate handling.Do not use chemicals or volatile liquids for cleaning. Use a clean dry cloth to wipe off the dust, or awet soft cloth for stubborn dirt.For transport use the original packing or designated accessory to avoid damages during the transport.For reasons of safety unauthorized changes are forbidden.A usage of the device which differs from usages which are described in this manual can causedamages of the device. In that case the warranty expires. Additional you should notice that everydiffered usage is related with dangers and can cause e.g. an electrical short, fire, electric shock orcrash.