7 / 9Slav – Setting of Master/Slave-mode1. Push the Enter MENU-Button, then the UP/DOWN-button until you can read “SLav” in thedisplay. Confirm with ENTER.2. The display shows “Sla”, now the device is controlled by the master device.Info – Shows the current software version1. Push the Enter MENU-Button, then the UP/DOWN-button until you can read “Info” in thedisplay. Confirm with ENTER.2. The display shoes the current software version.Pasd – aktivate or deaktivate the display buttons1. Tap the MENU button until“Pasd” is displayed. Press the ENTER button to choose ON orOFF2. Deaktivate the display buttons.Tap any button til is displayed.Now tap „MENU“, „UP“, „DOWN“ ,“ENTER“ to get into the main menu.

Safety instructions

Introduction

Varytec TouchWash User Manual