Vehicle care 2552. Remove lamp downwards, takingcare not to pull on the cable.3. Remove bulb holder from lamphousing by turning anticlockwise.4. Pull bulb from bulb holder andreplace it.5. Insert bulb holder into lamphousing and turn clockwise.6. Insert lamp into bumper and letengage.Interior lightsCourtesy light, reading lightsHave bulbs replaced by a workshop.Load compartment lightHave bulbs replaced by a workshop.Instrument panelilluminationHave bulbs replaced by a workshop.Electrical systemFusesData on the replacement fuse mustmatch the data on the defective fuse.There are three fuse boxes in thevehicle:● in the front left of the enginecompartment● in left-hand drive vehicles, in theinterior behind the storagecompartment, or, in right-handdrive vehicles, behind theglovebox● behind a cover on the left side ofthe load compartmentBefore replacing a fuse, turn off therespective switch and the ignition.A blown fuse can be recognised by itsmelted wire. Do not replace the fuseuntil the cause of the fault has beenremedied.Some functions are protected byseveral fuses.Fuses may also be inserted withoutexistence of a function.
