Radio 103Autostore listsActivate/deactivate AS levelTap the AS button.When the AS level is active, thedisplay shows AS.The AS level can also be activatedand deactivated using the FM/AMbutton 3 101.Autostore (AS)Automatic storing (AS) of anyreceivable station is possible in allwavebands. These stations arestored in a separate AS memory.To automatically store stations,proceed as follows:1. Select the required waveband.2. Enable/disable on standby fortraffic announcements if desired3 103.3. Hold down the AS button until youhear the confirmation signal.The radio changes over to the ASlevel of the selected waveband (FM-AS or AM-AS).The automatic station storing isstarted.The 9 best receivable stations in theselected waveband are stored tomemory slots 1 to 9.After the stations have been stored,the desired station can be selected bypressing the appropriate stationbutton.RDS is switched on automaticallywhen automatic storing is enabled.First, all receivable RDS stations arestored.If on standby for traffic announcementis switched on prior to or duringautomatic storing, the radio will selecta memory slot with a trafficannouncement station on completionof the automatic station search.If on standby for traffic announcementis switched on during automaticstoring, then the automatic stationsearch will remain active until at leastone traffic programme is found.Storing new stations with ASIf you drive out of the reception areaof a stored station, new stations needto be stored.Calling up a stationThe desired waveband and thedesired mode need to be active3 101.Hold down the AS button to go to theAS level.Select the storage location with thestorage buttons.Radio data system (RDS)RDS is a service provided by the radiostations which makes it significantlyeasier to find the FM channelsrequired and enables them to bereceived without interference.RDS is only possible on the FM band.Switching RDS on/offIf RDS is switched on, the RDSfunctions are enabled and only RDSstations are sought during theautomatic station search.