12 Introduction■ Treble■ SoundSetting the volume distributionbetween front - rear1. Press the SOUND button.Fader appears on the display.2. Adjust the value with m or n.After a few seconds the mostrecent display reappears.Or:Press one of the function buttonsTUNER, MEDIA or BC to display therelevant function.Setting the volume distributionbetween right - left1. Press the SOUND buttonrepeatedly until Balance appearson the display.2. Adjust the value with m or n.After a few seconds the mostrecent display reappears.Or:Press one of the function buttonsTUNER, MEDIA or BC to display therelevant function.Setting Bass and TrebleMake sure that any soundoptimisations (see below "Sound")are disabled.1. Press the SOUND buttonrepeatedly until Bass or Trebleappear on the display.2. Adjust the value with m or n.After a few seconds the mostrecent display reappears.Or:Press one of the function buttonsTUNER, MEDIA or BC to display therelevant function.Sound1. Press the SOUND buttonrepeatedly until Sound and thecurrently set tone colour or Offappear on the display.2. Select a tone colour, e.g. Rock orClassic, or Off with m or n.After a few seconds the mostrecent display reappears.Or:Press one of the function buttonsTUNER, MEDIA or BC to display therelevant function.Tone settings in the SettingsmenuAlternatively, the settings for Fader,Balance and Sound can be changedin the Settings menu:1. Press the SETTINGS button.2. Press the OK button repeatedlyuntil the relevant function isdisplayed.3. Adjust the value or select a tonecolour (see above) with m or n.After a few seconds the mostrecent display reappears.4. Press the SETTINGS buttonagain to return to the most recentdisplay.Volume settingsPress SETTINGS button.