Vehicle care 1913. Connect the black lead to thenegative terminal of the boosterbattery.4. Connect the other end of the blacklead to a vehicle grounding point,such as the engine block or anengine mounting bolt. Connect asfar away from the dischargedbattery as possible, however atleast 60 cm.Route the leads so that they cannotcatch on rotating parts in the enginecompartment.To start the engine:1. Start the engine of the vehicleproviding the jump.2. After 5 minutes, start the otherengine. Start attempts should bemade for no longer than15 seconds at an interval of1 minute.3. Allow both engines to idle forapprox. 3 minutes with the leadsconnected.4. Switch on electrical consumers(e.g. headlights, heated rearwindow) of the vehicle receivingthe jump start.5. Reverse above sequence exactlywhen removing leads.TowingTowing the vehicleInsert a screwdriver in the slot at thelower bend of the cap. Release thecap by carefully moving thescrewdriver downwards.The towing eye is stowed with thevehicle tools 3 177.
