Driving and operating 149Have the cause of the fault remediedby a workshop.Interruption of power supplyIn the event of an interruption ofpower supply, the selector levercannot be moved out of the Pposition. The ignition key cannot beremoved from the ignition switch.If the vehicle battery is discharged,start the vehicle using jump leads3 226.If the vehicle battery is not the causeof the fault, release the selector lever.1. Apply the parking brake.2. Release the selector lever trimfrom the centre console at thefront, fold it upwards and rotate itto the left.3. Insert a screwdriver into theopening as far as it will go andmove the selector lever out of P orN. If P or N is engaged again, theselector lever will be locked inposition again. Have the cause ofthe power supply interruptionremedied by a workshop.4. Mount the selector lever trim ontothe centre console and refit.Manual transmissionTo engage reverse, with the vehiclestationary, depress clutch pedal,press the release button on theselector lever and engage the gear.If the gear does not engage, set thelever to neutral, release the clutchpedal and depress again; then repeatgear selection.Do not slip the clutch unnecessarily.When operating, depress the clutchpedal completely. Do not use thepedal as a foot rest.
