238 Technical dataIdentification plateThe identification plate is located onthe left or right door frame.Information on identification label:1 : manufacturer2 : type approval number3 : vehicle identification number4 : permissible gross vehicle weightrating in kg5 : permissible gross train weightin kg6 : maximum permissible front axleload in kg7 : maximum permissible rear axleload in kg8 : vehicle-specific or country-specific dataThe combined total of front and rearaxle loads must not exceed thepermissible gross vehicle weight. Forexample, if the front axle is bearing itsmaximum permissible load, the rearaxle can only bear a load that is equalto the gross vehicle weight minus thefront axle load.The technical data is determined inaccordance with EuropeanCommunity standards. We reservethe right to make modifications.Specifications in the vehicledocuments always have priority overthose given in this manual.Engine identificationThe technical data tables use theengine identifier code. The enginedata table additionally shows theengineering code. Engine data3 242.To identify the respective engine,refer to the EEC Certificate ofConformity provided with your vehicleor other national registrationdocuments.The Certificate of Conformity showsthe engine identifier code, othernational publications may show theengineering code. Check pistondisplacement and engine power toidentify the respective engine.
