Driving and operating 111Ignition switch positions0 = Ignition off1 = Steering wheel lock released,ignition off2 = Ignition on, for diesel engine:preheating3 = StartingStarting the engineOperate clutch and brake, automatictransmission in P or N.Do not operate accelerator pedal.Diesel engine: turn the key to position2 for preheating and wait until controlindicator ! goes out.Turn key briefly to position 3 andrelease.Before restarting or to switch off theengine, turn key back to 0.Overrun cut-offThe fuel supply is automatically cut offduring overrun, i.e. when the vehicleis driven with a gear engaged butaccelerator is released. Overrun cut-off is deactivated if catalytic convertertemperature is high.Parking■ Do not park the vehicle on an easilyignitable surface. The hightemperature of the exhaust systemcould ignite the surface.■ Always apply parking brake withoutpressing release button. Apply asfirmly as possible on downhill oruphill slopes. Depress the footbrake at the same time to reduceoperating force.■ Switch off the engine and ignition.Turn the steering wheel until thesteering wheel lock engages.■ If the vehicle is on a level surface oruphill slope, engage first gear or setthe selector lever to P beforeswitching off the ignition. On anOfrecido por www.electromanuales.com
