Vehicle care 1397. Push bulb into socket slightly,rotate anti-clockwise, remove andrenew bulb.Turn signal light (1)Tail and brake light (2)Reverse light (3)Rear fog light, may be on one sideonly (4)8. Replace bulb holder in lampassembly.9. Replace the three screws on therear of the lamp assembly.10. Reattach wiring connector to lampassembly.11. Replace lamp assembly from theouter side into original position,ensuring that it is seated correctly.12. Replace the two nuts onto thelocating pins on the rear of thelamp assembly.13. Install the upper and lower trimpanels to the rear pillar.Side turn signal lights1. Push the lamp assembly to theright and pull at the left-hand sideof the lamp assembly to releasefrom the aperture.2. Detach wiring connector fromlamp assembly.3. Remove bulb holder from lampassembly by rotating 90° andrenew bulb.4. Install bulb holder in lampassembly.5. Reattach wiring connector.6. Install lamp assembly intoaperture and push to the left tosecure.Mirror turn signal lights1. Move the lower mirror assemblyfrom the front to access the screw.2. Remove the screw using a torxscrewdriver.3. Remove bulb holder from the rearof the lower mirror assembly.4. Renew bulb.
