Self-help, vehicle care 139Bulb replacementBefore replac ing a bulb, turn off therespective lig ht switch.O nly hold new bulb at base! O il a nd greasestains on the glass evaporate, ev entuallyresulting in a dull reflector. Inadvertentlystained bulbs may be c leaned with a clean,non-fluffy cloth, using alcohol or whitespirit.Replacem ent bulb m ust be in accordancewith d ata on base of defective bulb. Do notexceed wa tta ge g iv en on bulb b ase.Headli ght aim ingWe recommend that head light a im ing becarried out by a workshop, who will havespecial equipment.O n vehicles w ith headlight rangeadjustm ent, ca rry out headlight aim ingwith switch in position 0.Hea dlight dipped and ma in beam1. Remove harness connector.2. Remove rub ber sea l.3. Release retaining clip and remove bulb.4. Renew bulb and install retaining clipensuring tha t bulb is in correctorientation.5. Install rub ber sea l and harnessconnector.Park ing lig ht1. Remov e bulb holder from light assemb lyby rotating throug h 90º.2. Renew bulb.3. Install b ulb holder in light assembly.Ofrecido por www.electromanuales.com