Seats, restraints 53From the load compartment, pressthe button on the top of the backrestand lower the backrest. Using thehandle on the seat, pull rearwardsand upwards and then swing the seatforwards until it is lowered into thevehicle floor. Hold the seat by thehandle during the entire procedure.Push belt buckles into recess in floorand close cover.Install the rear floor storage cover andload compartment cover 3 69,3 68.Slide the second row of seats to therequired position and engage.Seat beltsThe belts are locked during heavyacceleration or deceleration of thevehicle for the safety of theoccupants.9 WarningFasten seat belt before each trip.In the event of an accident, peoplenot wearing seat belts endangertheir fellow occupants andthemselves.Seat belts are only designed for useby one person at a time. They are notsuitable for people younger than 12years of age or smaller than 150 cm(5 ft).Periodically check all parts of the beltsystem for damage and properfunctionality.Have damaged componentsreplaced. After an accident, have thebelts and triggered belt tensionersreplaced by a workshop.NoticeMake sure that the belts are notdamaged by shoes or sharp-edgedobjects or are trapped. Prevent dirtfrom getting into the belt retractors.Seat belt control indicator X 3 86.Belt force limitersIn the front seats, stress on the bodyis reduced by gradual release of thebelt during a collision.
