Installation Field Assembling Vac Sensor/Vac Float modules8shown in Figure 7. Once the tubing pieces are cut, remove the barbed elbows and tees to push on the tubingpieces, then reinsert this connected assembly back into the Vac Sensor bushings and tighten the nuts.Figure 4. Vac Sensor/Vac Float tubing connectionsFigure 5. Vac Sensor /tank interstice tubing connectionsVac FloatVac SensorCable connector (TLS port)3-way ball valveValve handle shown inoperating position (down)To vent monitored intersticerotate handle upVent portTapered bushing/nutTapered bushing/nut Tubing connects to interstitialspace being monitoredCable pair tojunction boxvacsensors/fig6.epsBarbed elbow (VAC TEST port)Barbed elbowBarbed tee(STP SIPHON port)Front of housingVac SensorCable connector (TLS port) Tapered bushing/nutTubing connects to Tank Interstice3-way valveCable pair tojunction boxvacsensors/fig6a.epsBarbed elbow (VAC TEST port)Barbed tee(STP SIPHON port)Front of housing
