1IntroductionThis manual contains instructions for replacing the following TLS-450 console components:• CPU board• RAM board• Replacing Software/CF card• Replacing iButton• Installing software features• Replacing CF card• Replacing CF card version 3.X or earlier to latest versionThis manual does not provide troubleshooting information.Contractor Certification RequirementsVeeder-Root requires the following minimum training certifications for contractors who will install and setup theequipment discussed in this manual:Installer (Level 1) Certification: Contractors holding valid Installer Certification are approved to perform wiringand conduit routing; equipment mounting; probe, sensor and carbon canister vapor polisher installation; wirelessequipment installation; tank and line preparation; and line leak detector installation.ATG Technician (Level 2/3 or 4) Certification: Contractors holding valid ATG Technician Certifications areapproved to perform installation checkout, startup, programming and operations training, system tests,troubleshooting and servicing for all Veeder-Root Series Tank Monitoring Systems, including Line Leak Detection.In addition, Contractors with the following sub-certification designations are approved to perform installationcheckout, startup, programming, system tests, troubleshooting, service techniques and operations training on thedesignated system.• Wireless 2• Tall TankVR Vapor Products Certification: Contractors holding a certification with the following designations areapproved to perform installation checkout, startup, programming, system tests, troubleshooting, service techniquesand operations training on the designated system.• ISD – In Station Diagnostics• PMC – Pressure Management Control• CCVP - Veeder-Root Vapor Polisher• Wireless – ISD/PMC Wireless• A current Veeder-Root Technician Certification is a prerequisite for the VR Vapor Products course.Warranty Registrations may only be submitted by selected Distributors.Related Manuals577013-879 TLS-450 Site Prep Manual577013-918 TLS-450 Troubleshooting Guide