112.6 Analogue SettingsThe ‘Analogue Settings’ menu allows you to calibrate the signals from a non-electronic engine.RPM calibration is a simple multiplier, have the engine running on idle andadjust using the plus or minus until the number in brackets is the same as theRPM shown on your gauge, or is reading the same as the idle RPM from theEngine Manual.You can use the arrow key’s to select, and the plus key to enter the nextscreen to calibrate the rest of the channels. Once in the calibration screen,for convenience, you can push Key 1, and it will move to the next channel.

Installing the Displays

Attaching to a J1939 Engines (CAN-bus)

Attaching to a Fuel Level Sender

System Configuration' Menu

Engine ID

NMEA 2000 Settings

J1939 Settings

Analogue Settings

Fuel Management Settings

Diagnostics

Veethree EGM Installation Manual