Vega VEGABAR 14 Operating Instructions Manual

Also see for VEGABAR 14: Operating instructions Operating instructions

Vega VEGABAR 14 Operating Instructions Manual Manual pdf 22 page image

229 SupplementVEGABAR 14 • 4 … 20 mA22441-EN-1611049 Supplement9.1 Technical dataNote for approved instrumentsThe technical data in the respective safety instructions are valid for approved instruments (e.g. withEx approval). These data can differ from the data listed herein, for example regarding the processconditions or the voltage supply.Materials and weightsMaterials, wetted partsƲ Process fitting 316L, Duplex steel (1.4462), PVDFƲ Diaphragm Sapphire ceramic® (99.9 % oxide ceramic)Ʋ Measuring cell seal FKM (VP2/A), EPDM (A+P 75.5/KW75F), FFKM (G75B,G75S)Seal for process fitting (in the scope of delivery)Ʋ Thread G½ (EN 837) Aramide fibres, bound with NBRƲ Thread G1½ (DIN 3852-A) Aramide fibres, bound with NBRMaterials, non-wetted partsƲ Electronics housing Brass, nickel-platedƲ Cable gland PA, stainless steel, brassƲ Sealing, cable gland NBRƲ Blind plug, cable gland PAMaterials, non-wetted parts, version with plug connector ISO 4400Ʋ Contact, housing plug PAƲ Lid screw StStƲ Contact surface SnƲ Plug seal SiliconeMaterials, non-wetted parts, version with plug connector M12 x 1Ʋ Contact support PAƲ Contacts CuZn, nickel layer and 0.8 μm gold-platedƲ Plug seal FKMMaterials, non-wetted parts, connection cable with plug connector M12 x 1 (optional)Ʋ Grip body, plug connector PAƲ Compression nut Zinc die castingƲ Cable/wire insulation PVCMaterials, non-wetted parts, verson with cable outletƲ Cable gland PAƲ Cable PE, PUR2)Ohmic contact Between ground terminal, housing and process fittingWeight approx. 0.25 kg (0.55 lbs)2) With ship approval and absolute pressure ranges.