Vega VEGABAR 52 Operating Instructions Manual

Also see for VEGABAR 52: Product information Operating instructions

Contents

Vega VEGABAR 52 Operating Instructions Manual Manual pdf 10 page image

103 Product descriptionVEGABAR 52 • 4 … 20 mA36716-EN-130321Up to the time of installation, the packages must be left closed andstored according to the orientation and storage markings on theoutside.Unless otherwise indicated, the packages must be stored only underthe following conditions:• Not in the open• Dry and dust free• Not exposed to corrosive media• Protected against solar radiation• Avoiding mechanical shock and vibration• Storage and transport temperature see chapter "Supplement -Technical data - Ambient conditions"• Relative humidity 20 … 85 %3.5 Accessories and replacement partsThe display and adjustment module PLICSCOM is used for measuredvalue indication, adjustment and diagnosis. It can be inserted into thesensor and removed at any time.You can find further information in the operating instructions "Displayand adjustment module PLICSCOM" (Document-ID 27835).Flanges are available in different versions according to the followingstandards: DIN 2501, EN 1092-1, ANSI B 16.5, JIS B 2210-1984,GOST 12821-80.You can find additional information in the supplementary instructionsmanual "Flanges according to DIN-EN-ASME-JIS" (Document-ID31088).The measuring instrument holder is used for wall/tube mounting ofVEGABAR series 50 pressure transmitters and VEGAWELL 52 sus-pension pressure transmitters. Supplied reducers enable the adapta-tion to different instrument diameters. The material used is 316L.The protective cover protects the sensor housing against soiling andintense heat from solar radiation.You will find additional information in the supplementary instructionsmanual "Protective cover" (Document-ID 34296).The electronics module is a replacement part for pressure transmitterVEGABAR. One version is available for each type of signal output.You find further information in the operating instructions "Electronicsmodule VEGABAR series 50 and 60 " (Document-ID 30175).StorageStorage and transporttemperatureDisplay and adjustmentmoduleFlangesMeasuring instrumentholderProtective coverElectronics module