Vega VEGABAR 55 Operating Instructions Manual

Vega VEGABAR 55 Operating Instructions Manual Manual pdf 14 page image

Use the seal suitable for the respective process fitting. You can findthe components in the supplementary instructions manual "Weldedsocket and seals".4.3 Mounting steps external housing1 Mark the holes according to the following drilling template2 Depending on the mounting surface, fasten the wall mountingplate with 4 screws90 mm (3.54")R 3,5 mm(0.14")3mm(0.12")70 mm (2.76") 8 mm(0.32")93 mm (3.66")110 mm (4.33")Fig. 5: Drilling template - wall mounting plateTip:Mount the wall mounting plate so that the cable entry of the sockethousing points downward. The socket housing can be displaced by180° to the wall mounting plate.Warning:The four screws of the socket housing must only be hand-screwed. Atorque > 5 Nm (3.688 lbf ft) can damage the wall mounting plate.Sealing/Screwing in hy-gienic fittingsWall mounting14 VEGABAR 55 • 4 … 20 mA4 Mounting36733-EN-091008