Vega VEGABAR 65 Operating Instructions Manual

Also see for VEGABAR 65: Product information

Contents

1 Push the [OK] button in the measured value display, the menuoverview is displayed.▶ Basic adjustmentDisplayDiagnosticsServiceInfo2 Confirm the menu "Basic adjustment" with [OK], the menu item"Unit" will be displayed.UnitUnit of measurementbar▼Temperature unit°C▼3 Activate the selection with [OK] and select "Units of measure-ment with [->].4 Activate the selection with [OK] and select the requested unit with[->] (in the example mbar).5 Confirm with [OK] and move to position correction with [->].The adjustment unit is hence switched over from bar to mbar.Information:When switching over to adjustment in a height unit (in the examplefrom bar to m), the density also has to be entered.Proceed as follows:1 Push the [OK] button in the measured value display, the menuoverview is displayed.2 Confirm the menu "Basic adjustment" with [OK], the menu item"Units of measurement" will be displayed.3 Activate the selection with [OK] and select the requested unit with[->] (in the example m).4 Confirm with [OK], the submenu "Density unit" appears.Unit of measurementDensity unit▶ kg/dm³pcf5 Select the requested unit, e.g. kg/dm³ with [->] and confirm with[OK], the submenu "Density" appears.Unit of measurementDensity0001000kg/dm³VEGABAR 65 • Profibus PA 336 Set up with the indicating and adjustment module PLICSCOM28253-EN-081209