Vega VEGABAR 82 Operating Instructions Manual

Also see for VEGABAR 82: Product information Operating instructions Quick setup guide Operating instructions Operating instructions

Contents

5711 SupplementVEGABAR 82 • HART and accumulator pack45029-EN-17052211 Supplement11.1 Technical dataNote for approved instrumentsThe technical data in the respective safety instructions are valid for approved instruments (e.g. withEx approval). These data can differ from the data listed herein, for example regarding the processconditions or the voltage supply.TorquesMax. torque for process fittingƲ G½, G¾ 30 Nm (22.13 lbf ft)Ʋ Fittings according to 3A with ex-changeable sealing20 Nm (14.75 lbf ft)Ʋ Hygienic fitting with compression nut(hexagon)40 Nm (29.50 lbf ft)Ʋ G1, M30 x 1.5 50 Nm (36.88 lbf ft)Ʋ G1 for PASVE 100 Nm (73.76 lbf ft)Ʋ G1½ 200 Nm (147.5 lbf ft)Max. torque for screwsƲ PMC 1", PMC 1¼" 2 Nm (1.475 lbf ft)Ʋ PMC 1½" 5 Nm (3.688 lbf ft)Max. torque for NPT cable glands and Conduit tubesƲ Plastic housing 10 Nm (7.376 lbf ft)Ʋ Aluminium/Stainless steel housing 50 Nm (36.88 lbf ft)Materials and weightsMaterials, wetted partsProcess fitting 316L, PVDF, Alloy C22 (2.4602), Alloy C276 (2.4819),Duplex steel (1.4462), Titanium Grade 2Diaphragm Sapphire-ceramic® (> 99.9 % Al2O3 ceramic)Joining material, diaphragm/base ele-ment of measuring cellGlass (with double and form seal, non-wetted parts)Measuring cell sealƲ Standard: lateral, recessed (O-ring) FKM (VP2/A, A+P 70.16), EPDM (A+P 75.5/KW75F),FFKM (Kalrez 6375, Perlast G75S, Perlast G75B)Ʋ Hygienic connection with compressionnut: in front (form seal)FKM (ET 6067), EPDM (EPDM 7076), FFKM (Chem-raz 535), FEPM (Fluoraz SD890)Seal for process fitting in the scope of deliveryƲ Thread G½ EN 837 Klingersil C-4400Ʋ Thread G1½ DIN 3852-A Klingersil C-4400Ʋ Hygienic connection with compres-sion nutFKM, EPDM, FFKM, FEPMƲ M44 x 1.25 (DIN 13), M30 x 1.5 FKM, FFKM, EPDMMaterials for applications in foodstuffs